## Release a payout

`client.Payouts.Release(ctx, id, params) (*PayoutV1, error)`

**put** `/v1/payouts/{id}/release`

Release a payout from a `hold` status to allow it to be rescheduled for processing.

### Parameters

- `id string`

- `params PayoutReleaseParams`

  - `Reason param.Field[string]`

    Body param: Details about why the payout status was updated.

  - `CorrelationID param.Field[string]`

    Header param: Optional client generated identifier to trace and debug a series of requests.

  - `IdempotencyKey param.Field[string]`

    Header param: Optional client generated value to use for idempotent requests.

  - `RequestID param.Field[string]`

    Header param: Optional client generated identifier to trace and debug a request.

  - `StraddleAccountID param.Field[string]`

    Header param: For use by platforms to specify an account id and set scope of a request.

### Returns

- `type PayoutV1 struct{…}`

  - `Data PayoutV1Data`

    - `ID string`

      Unique identifier for the payout.

    - `Amount int64`

      The amount of the payout in cents.

    - `Config PayoutV1DataConfig`

      Configuration for the payout.

      - `AutoHold bool`

        Defines whether to automatically place this charge on hold after being created.

      - `AutoHoldMessage string`

        The reason the payout is being automatically held on creation.

      - `SandboxOutcome string`

        Payment will simulate processing if not Standard.

        - `const PayoutV1DataConfigSandboxOutcomeStandard PayoutV1DataConfigSandboxOutcome = "standard"`

        - `const PayoutV1DataConfigSandboxOutcomePaid PayoutV1DataConfigSandboxOutcome = "paid"`

        - `const PayoutV1DataConfigSandboxOutcomeOnHoldDailyLimit PayoutV1DataConfigSandboxOutcome = "on_hold_daily_limit"`

        - `const PayoutV1DataConfigSandboxOutcomeCancelledForFraudRisk PayoutV1DataConfigSandboxOutcome = "cancelled_for_fraud_risk"`

        - `const PayoutV1DataConfigSandboxOutcomeCancelledForBalanceCheck PayoutV1DataConfigSandboxOutcome = "cancelled_for_balance_check"`

        - `const PayoutV1DataConfigSandboxOutcomeFailedInsufficientFunds PayoutV1DataConfigSandboxOutcome = "failed_insufficient_funds"`

        - `const PayoutV1DataConfigSandboxOutcomeReversedInsufficientFunds PayoutV1DataConfigSandboxOutcome = "reversed_insufficient_funds"`

        - `const PayoutV1DataConfigSandboxOutcomeFailedCustomerDispute PayoutV1DataConfigSandboxOutcome = "failed_customer_dispute"`

        - `const PayoutV1DataConfigSandboxOutcomeReversedCustomerDispute PayoutV1DataConfigSandboxOutcome = "reversed_customer_dispute"`

        - `const PayoutV1DataConfigSandboxOutcomeFailedClosedBankAccount PayoutV1DataConfigSandboxOutcome = "failed_closed_bank_account"`

        - `const PayoutV1DataConfigSandboxOutcomeReversedClosedBankAccount PayoutV1DataConfigSandboxOutcome = "reversed_closed_bank_account"`

    - `Currency string`

      The currency of the payout. Only USD is supported.

    - `Description string`

      An arbitrary description for the payout.

    - `Device DeviceInfoV1`

      Information about the device used when the customer authorized the payout.

      - `IPAddress string`

        The IP address of the device used when the customer authorized the charge or payout. Use `0.0.0.0` to represent an offline consent interaction.

    - `ExternalID string`

      Unique identifier for the payout in your database. This value must be unique across all payouts.

    - `FundingIDs []string`

      Funding Ids

    - `Paykey string`

      Value of the `paykey` used for the payout.

    - `PaymentDate Time`

      The desired date on which the payment should be occur. For payouts, this means the date you want the funds to be sent from your bank account.

    - `Status string`

      The current status of the payout.

      - `const PayoutV1DataStatusCreated PayoutV1DataStatus = "created"`

      - `const PayoutV1DataStatusScheduled PayoutV1DataStatus = "scheduled"`

      - `const PayoutV1DataStatusFailed PayoutV1DataStatus = "failed"`

      - `const PayoutV1DataStatusCancelled PayoutV1DataStatus = "cancelled"`

      - `const PayoutV1DataStatusOnHold PayoutV1DataStatus = "on_hold"`

      - `const PayoutV1DataStatusPending PayoutV1DataStatus = "pending"`

      - `const PayoutV1DataStatusPaid PayoutV1DataStatus = "paid"`

      - `const PayoutV1DataStatusReversed PayoutV1DataStatus = "reversed"`

      - `const PayoutV1DataStatusValidating PayoutV1DataStatus = "validating"`

    - `StatusDetails StatusDetailsV1`

      Details about the current status of the payout.

      - `ChangedAt Time`

        The time the status change occurred.

      - `Message string`

        A human-readable description of the current status.

      - `Reason StatusDetailsV1Reason`

        A machine-readable identifier for the specific status, useful for programmatic handling.

        - `const StatusDetailsV1ReasonInsufficientFunds StatusDetailsV1Reason = "insufficient_funds"`

        - `const StatusDetailsV1ReasonClosedBankAccount StatusDetailsV1Reason = "closed_bank_account"`

        - `const StatusDetailsV1ReasonInvalidBankAccount StatusDetailsV1Reason = "invalid_bank_account"`

        - `const StatusDetailsV1ReasonInvalidRouting StatusDetailsV1Reason = "invalid_routing"`

        - `const StatusDetailsV1ReasonDisputed StatusDetailsV1Reason = "disputed"`

        - `const StatusDetailsV1ReasonPaymentStopped StatusDetailsV1Reason = "payment_stopped"`

        - `const StatusDetailsV1ReasonOwnerDeceased StatusDetailsV1Reason = "owner_deceased"`

        - `const StatusDetailsV1ReasonFrozenBankAccount StatusDetailsV1Reason = "frozen_bank_account"`

        - `const StatusDetailsV1ReasonRiskReview StatusDetailsV1Reason = "risk_review"`

        - `const StatusDetailsV1ReasonFraudulent StatusDetailsV1Reason = "fraudulent"`

        - `const StatusDetailsV1ReasonDuplicateEntry StatusDetailsV1Reason = "duplicate_entry"`

        - `const StatusDetailsV1ReasonInvalidPaykey StatusDetailsV1Reason = "invalid_paykey"`

        - `const StatusDetailsV1ReasonPaymentBlocked StatusDetailsV1Reason = "payment_blocked"`

        - `const StatusDetailsV1ReasonAmountTooLarge StatusDetailsV1Reason = "amount_too_large"`

        - `const StatusDetailsV1ReasonTooManyAttempts StatusDetailsV1Reason = "too_many_attempts"`

        - `const StatusDetailsV1ReasonInternalSystemError StatusDetailsV1Reason = "internal_system_error"`

        - `const StatusDetailsV1ReasonUserRequest StatusDetailsV1Reason = "user_request"`

        - `const StatusDetailsV1ReasonOk StatusDetailsV1Reason = "ok"`

        - `const StatusDetailsV1ReasonOtherNetworkReturn StatusDetailsV1Reason = "other_network_return"`

        - `const StatusDetailsV1ReasonPayoutRefused StatusDetailsV1Reason = "payout_refused"`

        - `const StatusDetailsV1ReasonCancelRequest StatusDetailsV1Reason = "cancel_request"`

        - `const StatusDetailsV1ReasonFailedVerification StatusDetailsV1Reason = "failed_verification"`

        - `const StatusDetailsV1ReasonRequireReview StatusDetailsV1Reason = "require_review"`

        - `const StatusDetailsV1ReasonBlockedBySystem StatusDetailsV1Reason = "blocked_by_system"`

        - `const StatusDetailsV1ReasonWatchtowerReview StatusDetailsV1Reason = "watchtower_review"`

        - `const StatusDetailsV1ReasonValidating StatusDetailsV1Reason = "validating"`

        - `const StatusDetailsV1ReasonAutoHold StatusDetailsV1Reason = "auto_hold"`

      - `Source StatusDetailsV1Source`

        Identifies the origin of the status change (e.g., `bank_decline`, `watchtower`). This helps in tracking the cause of status updates.

        - `const StatusDetailsV1SourceWatchtower StatusDetailsV1Source = "watchtower"`

        - `const StatusDetailsV1SourceBankDecline StatusDetailsV1Source = "bank_decline"`

        - `const StatusDetailsV1SourceCustomerDispute StatusDetailsV1Source = "customer_dispute"`

        - `const StatusDetailsV1SourceUserAction StatusDetailsV1Source = "user_action"`

        - `const StatusDetailsV1SourceSystem StatusDetailsV1Source = "system"`

      - `Code string`

        The status code if applicable.

    - `StatusHistory []PayoutV1DataStatusHistory`

      History of the status changes for the payout.

      - `ChangedAt Time`

        The time the status change occurred.

      - `Message string`

        A human-readable description of the status.

      - `Reason string`

        A machine-readable identifier for the specific status, useful for programmatic handling.

        - `const PayoutV1DataStatusHistoryReasonInsufficientFunds PayoutV1DataStatusHistoryReason = "insufficient_funds"`

        - `const PayoutV1DataStatusHistoryReasonClosedBankAccount PayoutV1DataStatusHistoryReason = "closed_bank_account"`

        - `const PayoutV1DataStatusHistoryReasonInvalidBankAccount PayoutV1DataStatusHistoryReason = "invalid_bank_account"`

        - `const PayoutV1DataStatusHistoryReasonInvalidRouting PayoutV1DataStatusHistoryReason = "invalid_routing"`

        - `const PayoutV1DataStatusHistoryReasonDisputed PayoutV1DataStatusHistoryReason = "disputed"`

        - `const PayoutV1DataStatusHistoryReasonPaymentStopped PayoutV1DataStatusHistoryReason = "payment_stopped"`

        - `const PayoutV1DataStatusHistoryReasonOwnerDeceased PayoutV1DataStatusHistoryReason = "owner_deceased"`

        - `const PayoutV1DataStatusHistoryReasonFrozenBankAccount PayoutV1DataStatusHistoryReason = "frozen_bank_account"`

        - `const PayoutV1DataStatusHistoryReasonRiskReview PayoutV1DataStatusHistoryReason = "risk_review"`

        - `const PayoutV1DataStatusHistoryReasonFraudulent PayoutV1DataStatusHistoryReason = "fraudulent"`

        - `const PayoutV1DataStatusHistoryReasonDuplicateEntry PayoutV1DataStatusHistoryReason = "duplicate_entry"`

        - `const PayoutV1DataStatusHistoryReasonInvalidPaykey PayoutV1DataStatusHistoryReason = "invalid_paykey"`

        - `const PayoutV1DataStatusHistoryReasonPaymentBlocked PayoutV1DataStatusHistoryReason = "payment_blocked"`

        - `const PayoutV1DataStatusHistoryReasonAmountTooLarge PayoutV1DataStatusHistoryReason = "amount_too_large"`

        - `const PayoutV1DataStatusHistoryReasonTooManyAttempts PayoutV1DataStatusHistoryReason = "too_many_attempts"`

        - `const PayoutV1DataStatusHistoryReasonInternalSystemError PayoutV1DataStatusHistoryReason = "internal_system_error"`

        - `const PayoutV1DataStatusHistoryReasonUserRequest PayoutV1DataStatusHistoryReason = "user_request"`

        - `const PayoutV1DataStatusHistoryReasonOk PayoutV1DataStatusHistoryReason = "ok"`

        - `const PayoutV1DataStatusHistoryReasonOtherNetworkReturn PayoutV1DataStatusHistoryReason = "other_network_return"`

        - `const PayoutV1DataStatusHistoryReasonPayoutRefused PayoutV1DataStatusHistoryReason = "payout_refused"`

        - `const PayoutV1DataStatusHistoryReasonCancelRequest PayoutV1DataStatusHistoryReason = "cancel_request"`

        - `const PayoutV1DataStatusHistoryReasonFailedVerification PayoutV1DataStatusHistoryReason = "failed_verification"`

        - `const PayoutV1DataStatusHistoryReasonRequireReview PayoutV1DataStatusHistoryReason = "require_review"`

        - `const PayoutV1DataStatusHistoryReasonBlockedBySystem PayoutV1DataStatusHistoryReason = "blocked_by_system"`

        - `const PayoutV1DataStatusHistoryReasonWatchtowerReview PayoutV1DataStatusHistoryReason = "watchtower_review"`

        - `const PayoutV1DataStatusHistoryReasonValidating PayoutV1DataStatusHistoryReason = "validating"`

        - `const PayoutV1DataStatusHistoryReasonAutoHold PayoutV1DataStatusHistoryReason = "auto_hold"`

      - `Source string`

        Identifies the origin of the status change (e.g., `bank_decline`, `watchtower`). This helps in tracking the cause of status updates.

        - `const PayoutV1DataStatusHistorySourceWatchtower PayoutV1DataStatusHistorySource = "watchtower"`

        - `const PayoutV1DataStatusHistorySourceBankDecline PayoutV1DataStatusHistorySource = "bank_decline"`

        - `const PayoutV1DataStatusHistorySourceCustomerDispute PayoutV1DataStatusHistorySource = "customer_dispute"`

        - `const PayoutV1DataStatusHistorySourceUserAction PayoutV1DataStatusHistorySource = "user_action"`

        - `const PayoutV1DataStatusHistorySourceSystem PayoutV1DataStatusHistorySource = "system"`

      - `Status string`

        The current status of the `charge` or `payout`.

        - `const PayoutV1DataStatusHistoryStatusCreated PayoutV1DataStatusHistoryStatus = "created"`

        - `const PayoutV1DataStatusHistoryStatusScheduled PayoutV1DataStatusHistoryStatus = "scheduled"`

        - `const PayoutV1DataStatusHistoryStatusFailed PayoutV1DataStatusHistoryStatus = "failed"`

        - `const PayoutV1DataStatusHistoryStatusCancelled PayoutV1DataStatusHistoryStatus = "cancelled"`

        - `const PayoutV1DataStatusHistoryStatusOnHold PayoutV1DataStatusHistoryStatus = "on_hold"`

        - `const PayoutV1DataStatusHistoryStatusPending PayoutV1DataStatusHistoryStatus = "pending"`

        - `const PayoutV1DataStatusHistoryStatusPaid PayoutV1DataStatusHistoryStatus = "paid"`

        - `const PayoutV1DataStatusHistoryStatusReversed PayoutV1DataStatusHistoryStatus = "reversed"`

        - `const PayoutV1DataStatusHistoryStatusValidating PayoutV1DataStatusHistoryStatus = "validating"`

      - `Code string`

        The status code if applicable.

    - `TraceIDs map[string, string]`

      Trace Ids.

    - `CreatedAt Time`

      The time the payout was created.

    - `CustomerDetails CustomerDetailsV1`

      Information about the customer associated with the payout.

      - `ID string`

        Unique identifier for the customer

      - `CustomerType CustomerDetailsV1CustomerType`

        The type of customer

        - `const CustomerDetailsV1CustomerTypeIndividual CustomerDetailsV1CustomerType = "individual"`

        - `const CustomerDetailsV1CustomerTypeBusiness CustomerDetailsV1CustomerType = "business"`

      - `Email string`

        The customer's email address

      - `Name string`

        The name of the customer

      - `Phone string`

        The customer's phone number in E.164 format

    - `EffectiveAt Time`

      The actual date on which the payment occurred. For payouts, this is the date the funds were sent from your bank account.

    - `Metadata map[string, string]`

      Up to 20 additional user-defined key-value pairs. Useful for storing additional information about the payout in a structured format.

    - `PaykeyDetails PaykeyDetailsV1`

      Information about the paykey used for the payout.

      - `ID string`

        Unique identifier for the paykey.

      - `CustomerID string`

        Unique identifier for the customer associated with the paykey.

      - `Label string`

        Human-readable label that combines the bank name and masked account number to help easility represent this paykey in a UI

      - `Balance int64`

        The most recent balance of the bank account associated with the paykey in dollars.

    - `PaymentRail string`

      The payment rail used for the payout.

      - `const PayoutV1DataPaymentRailACH PayoutV1DataPaymentRail = "ach"`

    - `ProcessedAt Time`

      The time the payout was processed by Straddle and originated to the payment rail.

    - `RelatedPayments map[string, string]`

      Related payments.

      - `const PayoutV1DataRelatedPaymentOriginal PayoutV1DataRelatedPayment = "original"`

      - `const PayoutV1DataRelatedPaymentResubmit PayoutV1DataRelatedPayment = "resubmit"`

      - `const PayoutV1DataRelatedPaymentRefund PayoutV1DataRelatedPayment = "refund"`

    - `UpdatedAt Time`

      The time the payout was last updated.

  - `Meta ResponseMetadata`

    Metadata about the API request, including an identifier and timestamp.

    - `APIRequestID string`

      Unique identifier for this API request, useful for troubleshooting.

    - `APIRequestTimestamp Time`

      Timestamp for this API request, useful for troubleshooting.

  - `ResponseType PayoutV1ResponseType`

    Indicates the structure of the returned content.

    - "object" means the `data` field contains a single JSON object.
    - "array" means the `data` field contains an array of objects.
    - "error" means the `data` field contains an error object with details of the issue.
    - "none" means no data is returned.

    - `const PayoutV1ResponseTypeObject PayoutV1ResponseType = "object"`

    - `const PayoutV1ResponseTypeArray PayoutV1ResponseType = "array"`

    - `const PayoutV1ResponseTypeError PayoutV1ResponseType = "error"`

    - `const PayoutV1ResponseTypeNone PayoutV1ResponseType = "none"`

### Example

```go
package main

import (
  "context"
  "fmt"

  "github.com/straddleio/straddle-go"
  "github.com/straddleio/straddle-go/option"
)

func main() {
  client := straddle.NewClient(
    option.WithAPIKey("My API Key"),
  )
  payoutV1, err := client.Payouts.Release(
    context.TODO(),
    "182bd5e5-6e1a-4fe4-a799-aa6d9a6ab26e",
    straddle.PayoutReleaseParams{
      Reason: "reason",
    },
  )
  if err != nil {
    panic(err.Error())
  }
  fmt.Printf("%+v\n", payoutV1.Data)
}
```

#### Response

```json
{
  "data": {
    "id": "182bd5e5-6e1a-4fe4-a799-aa6d9a6ab26e",
    "amount": 10000,
    "config": {
      "auto_hold": true,
      "auto_hold_message": "auto_hold_message",
      "sandbox_outcome": "standard"
    },
    "currency": "currency",
    "description": "description",
    "device": {
      "ip_address": "192.168.1.1"
    },
    "external_id": "external_id",
    "funding_ids": [
      "182bd5e5-6e1a-4fe4-a799-aa6d9a6ab26e"
    ],
    "paykey": "paykey",
    "payment_date": "2019-12-27",
    "status": "created",
    "status_details": {
      "changed_at": "2019-12-27T18:11:19.117Z",
      "message": "Payment successfully created and awaiting validation.",
      "reason": "insufficient_funds",
      "source": "system",
      "code": null
    },
    "status_history": [
      {
        "changed_at": "2019-12-27T18:11:19.117Z",
        "message": "Payment successfully created and awaiting validation.",
        "reason": "insufficient_funds",
        "source": "watchtower",
        "status": "created",
        "code": null
      }
    ],
    "trace_ids": {
      "foo": "string"
    },
    "created_at": "2019-12-27T18:11:19.117Z",
    "customer_details": {
      "id": "182bd5e5-6e1a-4fe4-a799-aa6d9a6ab26e",
      "customer_type": "individual",
      "email": "ron@swanson.com",
      "name": "Ron Swanson",
      "phone": "+1234567890"
    },
    "effective_at": "2019-12-27T18:11:19.117Z",
    "metadata": {
      "foo": "string"
    },
    "paykey_details": {
      "id": "182bd5e5-6e1a-4fe4-a799-aa6d9a6ab26e",
      "customer_id": "182bd5e5-6e1a-4fe4-a799-aa6d9a6ab26e",
      "label": "Bank of America ****1234",
      "balance": 0
    },
    "payment_rail": "ach",
    "processed_at": "2019-12-27T18:11:19.117Z",
    "related_payments": {
      "foo": "original"
    },
    "updated_at": "2019-12-27T18:11:19.117Z"
  },
  "meta": {
    "api_request_id": "182bd5e5-6e1a-4fe4-a799-aa6d9a6ab26e",
    "api_request_timestamp": "2019-12-27T18:11:19.117Z"
  },
  "response_type": "object"
}
```